User's Manual
Table Of Contents
- Safety summary
- About the manual
- Introduction
- Getting started
- Operating the system
- Using the web interface
- Introduction
- Entering the SIM PIN in the web interface
- Using the Dashboard
- Using the phone book
- Using the Call log
- Handling SMS messages
- Setting up the interfaces
- Managing LAN network users
- Uploading software
- Selecting the preferred BGAN satellite
- Selecting the language
- Administration
- Help desk and diagnostic report
- Event logging and self test
- Site map
- Troubleshooting
- Conformity
- Glossary
- Index
Chapter 4: Using the web interface
98-131305-A Administration 122
Restricted dialing
In order to manage the use of the system efficiently you can set up the terminal to limit all calls to
allowed numbers or numbers in the phone book. This feature can be enabled for each connected
handset separately.
To setup the terminal for restricted dialing, do as follows:
1. From the left navigation pane, select ADMINISTRATION > Restricted dialing.
2. Select whether restricted dialing should be Enabled or Disabled.
3. Type in the allowed numbers or masks in the entry fields.
The numbers or masks must be max. 32 digits and may start with +. No other special
characters are allowed. A mask is the first part of a phone number, and it covers all numbers
that start with that first part. See the example below.
4. Select whether outgoing calls should be limited to the numbers in the phone book.
5. Check which local numbers are available in your system. Then select for which local numbers
you want to enable the restriction.
6. Click Apply to apply the new settings.
Mask Numbers accepted
00453955880 004539558800 to 004539558809
+45395588 004539558800 to 004539558899