User's Manual
Table Of Contents
- Safety summary
- About the manual
- Introduction
- Getting started
- Operating the system
- Using the web interface
- Introduction
- Entering the SIM PIN in the web interface
- Using the Dashboard
- Using the phone book
- Using the Call log
- Handling SMS messages
- Setting up the interfaces
- Managing LAN network users
- Uploading software
- Selecting the preferred BGAN satellite
- Selecting the language
- Administration
- Help desk and diagnostic report
- Event logging and self test
- Site map
- Troubleshooting
- Conformity
- Glossary
- Index
Chapter 4: Using the web interface
98-131305-A Setting up the interfaces 77
Managing IP handsets
Overview
The terminal has 4 LAN (PoE) connectors for connection of IP handsets or other IP equipment. You
may connect your IP handsets directly to the LAN interfaces or use a PoE switch to connect more
handsets. The EXPLORER 325 terminal supports connection of up to 16 handsets.
Each handset must have a local number in the range 0501 to 0516 as well as a unique password.
Note that you must set this up in the web interface for the connections to work. For further
information, see the next section Connecting a new IP handset.
Connecting a new IP handset
To connect a new IP handset, do as follows:
1. Connect the IP handset to one of the LAN ports of the terminal.
2. In the web interface, select SETTINGS > IP handsets.
Note
The handset with the local number 0501 is the master handset. This means you can
start/stop data sessions from the terminal with this handset, if the function is allowed in
the User permissions page. See Setting up user permissions on page 117.
Note
The first handset that is connected to the LAN interface on the terminal is automatically
registered in the terminal and assigned the local number 0501 and password 0501.