User Manual

Chapter 2: Getting started
Getting started with the wireless IP Handset 9
2222
Getting started
To connect the external power supply to the cradle
The cradle for the IP Handset serves as a charger when it is connected to an
external power supply (12-24 V DC, 6W).
A compatible power supply, TT-3682L, is available from Thrane & Thrane. This
power supply is also used for the EXPLORER 500 BGAN terminal.
To connect the power supply, do as follows:
1. On the back of the cradle, unscrew the two screws holding the cover.
2. Remove the cover.
3. Connect your power supply to the cradle.
There are two options for connecting to the cradle:
• Using the internal DC connector in the cradle.
The connector is a proprietary DC Jack, 2.5 mm, positive center.
Terminal block J101
DC Connector