User Manual

Chapter 2: Getting started
Getting started with the wired IP Handset 15
2222
Getting started
Getting started with the wired IP Handset
Introduction
The wired IP Handset connects to the cradle with a coil cord. The cradle
connects with a fixed LAN cable to a LAN port with PoE, for example in a BGAN
terminal. The IP Handset is powered directly from the LAN (PoE) interface.
Connectors
IP Handset connectors
The IP Handset has a coil cord with a LAN connector for connecting to the
cradle or directly to a LAN (PoE) interface.
The handset also has two connectors on the side of the handset, for future
use:
• one connector for connecting a headset.
• one Mini-USB connector.
Note
These two connectors are currently not functional.