User's Manual

17
Detail
05440544
• If the MMSI number is a group number, the group call flow is entered from the
window where a channel is selected.
• If a ship station number MMSI is available, the station call flow is entered from the
window where a channel is selected.
• If the MMSI number is a coast station, the operator will be led to the transmit
verification window for a station call.
4.5.1.1 Using the Contact list from the Call Sequences
Any call initiated from the DSC call menu that needs an MMSI number or PSTN number,
might search and use that number from the Contact list. If “Search for Contact” is selected
from anywhere in a call flow the contact search list is entered. Selecting the contact with
will return to the corresponding MMSI/PSTN entry window in the call flow with the
selected number information pre-filled.
4.5.2 Show contact
Via the menu item 2.2. it is possible to search for a contact’s information without changing or
initiate anything.
4.5.3 Adding a new contact
If you want to add a new contact to your list, go into menu item 2.3. The following empty
contact window will appear:
Add Contact
Name:
MMSI:
PSTN:
Save contact
The focus bar is used to control what field the operator
wants to put information into.
Example if is pressed:
Add Contact
Name:
Anders Fisker
After having pressed the contact information
looks as follows:
Add Contact
Name: Anders Fisker
PSTN:
Save contact
MMSI:
Proceed with the necessary data entries.
When finished move the focus bar to “Save contact”
and press .
As a minimum a contact name and a valid MMSI number
must be entered. If a PSTN number is entered the MMSI
number for that contact must be a valid coast station
MMSI number (00*).