User's Manual

47
Installation
0544
9.2.1 System block diagram with connection box and
2 x extension box
(rear view)
Option
SPARC II bus
Handset
(Optional)
DSC Antenna RG214 or better
Cable part no. 56.114 L=5m furnished with Connection Box
Cable part no. 539603 L=5m furnished with Connection Box
To VDR To ships alarm panel or announcer
2x0.5mm2
From position sensor (GPS)
(mixed Rx/Tx Audio)
2x0.5mm2,
max 100m
NMEA
1x2x0.5mm2
(Optional)
(Optional)
Extension Box
Ext. speaker (CU)
Ext. speaker (VHF)
CU 1 (Optional)
(Optional)
Extension Box
To LAN Box (optional)
To Alarm Panel - (if installed)
2x2x0.5mm2, max 100m
8x2x0.5mm2, max. 20m 8x2x0.5mm2, max. 20m
Connection Box
39701B
Cable part no. 56.111
L=1.2m
furnished with LAN Box
VHF
L=3m
(Optional) (Optional)
Ext. speaker (CU)
Ext. speaker (VHF)
CU 2 (Optional)
L=3m
Handset
PL259
RX/TX Antenna RG214 or better
PL259
Power 12-24V DC
Cable L=1.5m furnished with equiptment
(Optional)
Cable Connection diagram
See next page:
Note:
SPARC II cable length specification
Conductor size
Maximum cable length
8x2x0.5mm2
20m
8x2x0.75mm2
30m
8x2x1mm2
40m
All cabling not furnished with equipment to be overall screened type.
Cable screens must be securely grounded at cable inlets in connection boxes, as illustrated in cable connection diagrams.
120W min. continuous
Power cable p/n 539826, 1.5m 2x4.0mm2
+ VDC
White
0 VDC
Black
Power connection 12-24VDC,
External power supply input is galvanically isolated from equipment ground reference, i.e. chassis. Equipment internal power supply reference (-) is at equipment ground reference, i.e. chassis.
.