User's Manual

17
0512
4. Find the “Time/date” item using and press:
To see the effect, exit the menu system.
Billing
When a mobile originated call is initiated from the RJ11 port (PSTN/
PABX) and the call is connected to the remote user, the system
sends the billing tone to the PSTN/PABX at the RJ11 port. The tone
lasts for 500ms. Some PABX can catch this tone and start billing the
user at the PABX for the call.
Enter Billing Menu
1. To enter the function menu press:
2. Select the setup item
3. Select billing item
The following options are available in the billing menu.
Status
Select status will show if the billing is enabled or disabled and also
show the billing frequency.
Enable
Select enable will enable the billing tone
Disable
Select disable will disable the billing tone
Frequency
Select frequency, select 12kHz or 16kHz, refer to PABX manual to
select correct frequency.
SIM Card Handling
Your Iridium equipment monitors the SIM card status. The status
information is shown in the display of each handset in ready state.
SIM Card Messages
As long as one of the following messages are seen in the display,
the SIM card currently inserted in the transceiver cannot be used for
making external outgoing calls.
• SIM card blocked: This message indicates that a wrong pin
code has been entered three times in a row with the current SIM
card inserted into the transceiver. To unblock the SIM card, enter the
correct PUK1 code.
• Card blocked permanently: This message indicates that a
wrong PUK1 code has been entered ten times in a row. The SIM
card is now permanently blocked and cannot be unblocked.
• SIM card defective: This message indicates that your Iridium
equipment has detected that a SIM card has been inserted into the
SIM card slot. For some reason, however, the Iridium equipment
cannot communicate with the SIM card.
• SIM card validation: This message indicates that a valid SIM
card has been inserted into the SIM card slot, and that the pin code
just entered is being validated by the Iridium system.
Note: In case of SIM card problems you must contact your Iridium
Service Partner for help.
Enabling and Disabling PIN Codes
Each SIM card has an associated PIN code. In order to prevent
unauthorized use of SIM cards, your Iridium equipment is capable of
enabling and disabling the associated PIN codes.
When the PIN code from a given SIM card is enabled, the user must
enter the current value of this PIN code each time the SIM card is re-
entered into the SIM card holder in the transceiver. When the PIN
code for a given SIM card is disabled, the SIM card can be used for
making external outgoing calls, provided that it is not defect or
blocked.
Enabling the PIN Code
1. To enter the function menu, press: