User's Manual

25
Auto Restart
The auto restart menu is used for debugging/maintenance only.
When enabled, auto restart will only be carried through when the
system is not in use.
Under the auto restart menu, the available items are:
Mode
The mode setting is used together with the timer as a condition for
when the system can reset. The mode settings - 10 minutes, 1
minute or 0 minute - will allow the system to reset after the timer
expires and when the condition that the handset has not been in use
for a period of 10 minutes,1 minute or 0 minute has been fulfilled.
Hardware Restart
Pressing the restart switch next to the SIM card holder will power
recycle the unit.
0512
Using an Analogue Telephone
You can connect an analogue telephone to your Iridium equipment.
Many of the system’s more advanced features, like the security lock
function, are however not accessible from an analogue telephone.
The accessible features are described in the Analogue Phone Menu.
Making a Manual Call
How to make an External Call
Entering a telephone number on an analogue telephone follows the
procedure shown with this example:
1. Pick up phone: dialling tone.
2. External call 0
3. Prefix for automatic call 0 0
4. Country code, e.g. 4 5
5. Area code, e.g. 7 0
6. Subscriber’s number, e.g. 1 3 7 0 0 0
7. To confirm you want to make the call,
press #
How to make an Internal Call
Entering a telephone number on an analogue telephone follows the
procedure shown with this example:
1. Pick up phone: dialling tone.
2. Internal number, e.g. 1001
3. To confirm you want to make the call,
press #
>Status
Enable
Disable
Timer
Enable
Disable
Timer
>Mode