User's Manual

Answering a Call

NOTE: When the speaker is off you can see that you are being

called, (the display will show “Incoming Call”) but there will be

no sound in the speaker. The speaker can be toggled on and off

using:

1. When the handset rings, remove it from the hook and communi-

cate as on an ordinary telephone.

2. Adjust the volume in the earpiece or loudspeaker by means of:

3. When you want to stop communicating, hang up or press hook

key.

Call Transfering

A call can be transfered to another handset. The procedure depends

on whether or not the call is answered before it is transferred.

Transferring AFTER Answering

When you answer a call, the display shows:

To transfer the call:

1. Press:

Connected

0512

2. Now, key in the extension number to which the call should be

transferred.

3. To transfer the call, press:

- or:

To cancel transferring the call, press:

Automatic Transferring BEFORE Answering

A call can be transferred to another handset automatically before it is

answered. To see if the auto transferring function is enabled,

press:

The display will show eg.:

The auto transferring parameters can be set up individually for each

handset in the function menu:

1. To enter the function menu, press:

2. To select the “Setup” item, press:

3. To find the “Transfer” item, use:

and press:

Call is

transferred

Call trans-

fer enabled

Local: 1001

Delay: 0 sec 10

Call trans-

fer disabled

Enter number