Assembly Instructions

ASSEMBLY INSTRUCTIONS

BED WITH BED DRAWER

Before assembling your Drawer bed, please read through these

instructions carefully, familiarize yourself with the different parts.

HARDWARE

JCB M6 X 1”( 25mm ) - 16 pcs

Spare - 2 pcs

Allen Wrench - 1 pc

Spare - 1 pc

Adult Assembly

Allen Wrench

READY

NOTE : WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH OR JCB ARE DAMAGED DURING ASSEMBLY.

LIFESTYLE BED DRAWER

Page 1 of 3

PAGE 1
READY LIFESTYLE BED DRAWER ASSEMBLY INSTRUCTIONS Before assembling your Drawer bed, please read through these instructions carefully, familiarize yourself with the different parts. Adult Assembly BED WITH BED DRAWER Allen Wrench HARDWARE NOTE : WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH OR JCB ARE DAMAGED DURING ASSEMBLY.
PAGE 2
PARTS LIST 01 HARDWARE 1 BOX 04 DRAWER BACK 2 PCS 02 DRAWER FACE 2 PCS 05 DRAWER PANEL 2 PCS 03 DRAWER SIDE 4 PCS 03 04 05 03 02 01 STEP 1 03 A Adult Assembly A 03 02 JCB M6 X 1” B A Allen Wrench Lay the drawer face (02) on smoth, flat surface so the groove are facing upwards. Fit the drawer side (03) to drawer face (02), Use JCB M6 X 1” (A), Tighten with Allen wrench (B).
PAGE 3
STEP 2 STEP 3 A 05 04 A Adult Assembly A JCB M6 X 1” B Allen Wrench Guide the drawer panel (05) in carefully so that it won’t jump out of its grooves. Be sure it fits fully into its groove at the bottom (in the drawer face) before fitting the drawer back. Attach drawer back (04) to bed drawer assembly as shown. Use JCB M6 X 1”(A). Tighten with Allen wrench (B). Congratulations ! Your lifestyle bed drawer is now ready for use.