ASSEMBLY INSTRUCTION A Top Panel B Center Panel (Right) G 1 pc K Center Shelf (Small) Flat Washer M8 x 16mm L Allen Key with Ball M4 1 pc H Drawer Q Spring Washer 5/16" M Wooden Dowel Ø10 x 30mm 20 pcs Bottom Panel Minifix Bolt with Housing R PH Screw M4 x 16mm 18 pcs W Anti-Tipping Kit 1 set 1 Side Panel (Right) E 1 pc I Back Panel N Door Knob with TH Screw M4 x 25mm J CSK Screw M4 x 32mm 10 pcs Side Shelf (Big) 2 pcs O JCBC Bolt M6 x 40mm 15 pcs 3 pcs S Center Panel
This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage. IMPORTANT NOTE : 1. Do not tighten all screws / bolts until all completely assembled. 2. Keep all hardware parts out of reach of children. 1 Insert Wooden Dowel (V) to all dowel holes on (B), (E), (F), (G), (H).
Insert Bottom Panel (H) to Center Panel (E)&(F) and secure it with Flat Washer (P), Spring Washer (Q) and JCBC Bolt (O) and tighten with Allen Key (U). 4 Gently insert Side Panel (Left) (C) to the Bottom Panel (H) and secure it with Flat Washer (P), Spring Washer (Q) and JCBC Bolt (O) and tighten with Allen Key (U). 5 Place Back Top Rail (G) to Center Panel (E)&(F) and secure it with Flat Washer (P), Spring Washer (Q) and JCBC Bolt (O) and tighten with Allen Key (U).
7 Turn the Front Frame (B) upside down and place it on a piece of cloth to prevent from scratching. Gently insert the semi assembled Server to the Front Frame (B). Insert Minifix Housing (M) and follow the arrow to lock it. 8 Secure the Bottom Panel (H) to Front Frame (B) with Flat Washer (P), Spring Washer (Q) and JCBC Bolt (O) and tighten it with Allen Key (U). 9 Insert Wooden Dowel (V) to the pre-drilled holes at the Top Panel (A). Gently place the semi assembled Server to the Top Panel (A).
11 In order to insert the Drawer (L), pull out the drawer glide to the end. Then, gently insert the drawer. 12 Insert the Shelf Stud (T) to the pre-drilled holes at the Side Panel (C)&(D) and Center Panel (E)&(F) and place the Shelf (J)&(K) following the note below. 13 Attach the Door Knob (N) to the pre-drilled holes and tighten it with TH Screw (N) given using Screwdriver (not provided). 14 Attach Anti-Tipping Kit (W) to wall. Attach Bracket (vertically) to wall using the Long Screw provided.
