Installation & Assembly

I
Turn the Server (A) upside down on a protective surface such as carpet or other soft
material. Remove the square block which screw at the four corner of Server Top. Turn
the screw anti-clockwise. See diagram below.
2J Turn the Server (A) upside down and place it on a piece of cloth to prevent from
scratching. Attached Leg (C) to the back corner block of Server (A) . Tighten the
Legs (C) with Flat Washer (E), Spring Washer (F) and Hex Bolt (D) and tighten it using
Wrench (G).
2