Installation & Assembly

^ Align the holes of Shelf (B) corner block to the Server Leg (C). Tighten the Shelf (B) with
Flat Washer (E), Spring Washer (F) and Hex Bolt (D) and tighten it using Wrench (G).
Repeat Step 2 and 3 to the other Legs (C).
CLEANING & CARE
Treat surface with care. Surface is resistant to scratches but is not scratches resistant. Clean surface with
a dry or dampsoft cloth. Do not use abrasive cleaners. Hardware may loosen overtime. Priodicaliy
check that all connections are tight.
3