Installation & Assembly

□

Aligh the dowel holes on the Shelf (B) to the dowel at the Center Vertical Panel (D),

then tighten it with Flat Washer (K), Spring Washer (L) and JCBC Bolt (J) using Allen

Key (N).

5^ Place the Leg (C) to the comer of Apron and tighten it with Flat Washer (K), Spring

Washer (L) and Flex Bolt (I) using Wrench(M). Repeat the same to the other Legs.

Insert and turn the Hanger Bolt of Bottom Leg Support (H) to the holes at the center of

Shelf (B). Adjust the leveler to level the unit.

□ Turn the Server on it's position. Assemble the Wine Rack (Vertical) (E) to the Wine

Rack (Horizontal) (F), following the picture and insert the complete Wine Rack

assembly to the Server.

CLEANING & CARE

Treat surface with care. Surface is resistant to scratches but is not scratches resistant. Clean surface with

a dry or dampsoft cloth. Do not use abrasive cleaners. Hardware may loosen overtime. Priodicaliy

check that all connections are tight.