Installation and Assembly

Assembly Instruction

1. Identify all parts packed in carton against the parts list. Remove all protective material carefully and avoid

cutting the surface of the furniture while removing the bubble wrap.

2. Put the table top upside down a flat surface. Attach the legs with Big washers and Big lock washers and

nuts, don’t tighten at this time.

3. Connect the legs with the Center Rings, tighten with Bolts, Small washers, Small lock washers.

Progressively tighten all the bolts until secure.

4. Turn the table on its legs, you can adjust foot plugs to level table if needed.

5. You can put the Ice Bucket into the center of table top,then get the Cap on.

Parts

Description

Quantity

Parts

Description

Quantity

Table top

Big

Washer

Cap

Small

Washer

Center

Ring

Big Lock

Washer

Nut

Small Lock

Washer

Bolt

Leg

Ice Bucket

Bolt

Warning: Do not force components and over tighten during assembly.

Don’t touch the leg when you turn the table top upside down.

PAGE 1
Assembly Instruction 1. Identify all parts packed in carton against the parts list. Remove all protective material carefully and avoid cutting the surface of the furniture while removing the bubble wrap. 2. Put the table top upside down a flat surface. Attach the legs with Big washers and Big lock washers and nuts, don’t tighten at this time. 3. Connect the legs with the Center Rings, tighten with Bolts, Small washers, Small lock washers. Progressively tighten all the bolts until secure. 4.