COUNTER CHAIR ASSEMBLY INSTRUCTIONS Read instruction carefully prior to assembly. Thank you for purchasing this quality product. Check carefully for small parts which may come loose during shipment.Remove all components from pack and place top down on soft surface such as carpet or cloth to prevent scratching the finish. Identify and count all parts as specified below. It is recommended to use one person during the assembly process.
ASSEMBLY INSTRUCTIONS COUNTER CHAIR Step 3 Right side Stretcher “R" sticker stick under stretcher Front Stretcher. Left side Stretcher “L" sticker stick under stretcher STEP 3: Attach L/R side stretcher (E/F) to grant leg (C) and chair wood screw (7)by Phillip head-screw driver (not provided) Attach front stretcher (D) to front leg (C) using wood screw {7) by Phillip head-screw driver {not provided).
ASSEMBLY INSTRUCTIONS SIDE CHAIR Read instruction carefully prior to assembly. Thank you for purchasing this quality product. Check carefully for small parts which may come loose during shipment.Remove all components from pack and place top down on soft surface such as carpet or cloth to prevent scratching the finish. Identify and count all parts as specified below. It is recommended to use one person during the assembly process. Size Qty @1/4"x 75mm | poss #1/4"x 38mm apes | PCs PARTS LIST: No.
ASSEMBLY INSTRUCTIONS SIDEBOARD Read instruction carefully prior for assembly Thank you for purchasing this product . Be sure to check all packing material carefully for small parts that may have come loose inside the carton during shipment . Remove all components from pack and place on soft surface to prevent scratch during assembly. Identify and count all parts as specified below It is recommended to use two people during the assembly process.
ASSEMBLY INSTRUCTIONS SIDEBOARD STEP 1: STEP Step 2: Attach tipping restraint to Wall . The tipping restraint must be attached at back of Sideboard above and on the right .
ASSEMBLY INSTRUCTIONS TABLE, LEG DINNING W/18"L Read instruction carefully prior for assembly Thank you for purchasing this product . Be sure to check all packing material carefully for small parts that may have come loose inside the carton during shipment . Remove all components from pack and place on soft surface to prevent scratch during assembly. Identify and count all parts as specified below It is recommended to use two people during the assembly process. PARTS LIST: HARDWARE LIST: No.
ASSEMBLY INSTRUCTIONS TABLE, LEG DINNING W/18"L Step 2: Attach Leg (P2) to Table Top( P1) using Step 3: Pull out Table Top each side . Flat Washer (H2), Lock Washer (H1), hex nut (H3) by using open wrench (H4) and Unlock the Table . STEP 4: Step 4: Put Extender top (P3) to Table Top (P1) . Step S: Push two side tops that reach these leafs then lock them by using Sash lock .
ASSEMBLY INSTRUCTIONS TABLE , COUNTER HEIGHT Read instruction carefully prior for assembly Thank you for purchasing this product . Be sure to check all packing material carefully for small parts that may have come loose inside the carton during shipment . Remove all components from pack and place on soft surface to prevent scratch during assembly. Identify and count all parts as specified below It is recommended to use two people during the assembly process. He PARTS LIST: HARDWARE LIST: No.
ASSEMBLY INSTRUCTIONS TABLE , COUNTER HEIGHT STEP 2: ‘A MDD \/ PO YA} Step 2: Attach Extender top (P3) to Leg ( P2) using Flat Washer (H2), Lock Washer (H1), Allen bolt (H3) by using Allen key (H4) Page: 2/2 MADE IN VIETNAM
