Limited Warranty Bonded Leather Slipper Chair Assembly Instructions THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Assembly Instructions Step 3 -- Place the Pillow (D) on the Seat Frame (C). The chair is now ready for use.
Step 2 -- Turn over the Seat Frame (C), align the metal bracket on the Back Frame (B) to the metal bracket locked at the rear of the Seat Frame (C). Slide the Back Frame (B) into the Seat Frame (C) until fully engaged. NOTES: • Please read the instruction sheets completely before assembly. • Remove all parts from carton and ensure all parts are included prior to assembly. B • Assemble the slipper chair on a protected surface to avoid scratching the components. • Do not use power tools.
Assembly Instructions Parts List Step 1 -- A Wood Legs with Washers (4) B Back Frame (1) Place the Seat Frame (C) upside down. Open the zipper on the bottom of the Seat Frame (C) and take out the Wood Legs with Washers (A) out of the seat box. Remove the plastic caps on the threaded bolts of each leg. Attach the Wood Legs with Washers (A) to the corners of the Seat Frame (C). C A C Seat Frame (1) D Pillow (1) Important! Please read: Part A is inside of part C.
