ASSEMBLY INSTRUCTION POWDER COAT TWIN METAL BED 2 pes 2 pes Support leg Extension leg 2 pes 2 pcs 6 pcs 2 pcs Bolt Bolt Bolt “A”e" wench RIBBON s 1o DAY 1pc 18 pcs 8 pcs 6 pcs Flat washer 28 pcs This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly, place the contents on a carpeted or padded area to protect them from damage.
1 Assemble the extension leg(H) to the headboard (A) with 4 pcs bolt (J) fastened using Allen wrench pcs Assemble side rail (C) and side rail (D) together by using bolt {J) and flat washer (M) as shown as drawing and tighten with the Allen wrench (1). pes X6 pcs Assemble the slat (E) and slat (F) to the support leg (G) with 1 pc bolt (L) 1 pc flat washer (M) for each support leg (G) then fastened using Allen wrench (1).
4 Assemble the sub assembly side rail (C) and (D) to the headboard (A) with 4 pcs bolt (K) AND 4 pes flat washer the the sub assembly side rail (C) and (D) to the foot board (B) with 4 pcs bolt (K) AND 4 pcs flat washer (M), Then fastened using Allen wrench = K X8 pes M & Apexes Assemble the slat (E) and slat (F) to the side rail (C) and side rail (D) with 1 pc bolt (J} and 1 flat washer (M) for each end of slat (E) and slat (F) then fastened using Allen wrench (1).
