Outdoor Furniture IMPORTANT If you have any problems with this product (missing or damaged parts, assembly issues, etc.), PLEASE DO NOT RETURN TO THE RETAILER/STORE from where you purchased the product. To expedite any future warranty claims, please retain the Instruction Sheet, Warranty Card and receipt for future use.
CAUTION: Read all the instruction before assembly. Failure to do so may result in faulty assembly and potential injury! Assemble the item on a soft, non-abrasive surface such as a carpet or cardboard to avoid damaging the item. Seek assistance to assemble bulky or heavy items. After final alignment, make sure all bolts, nuts and nut covers are securely tightened.
Assembly Steps: Step1: Part# A x1 Part# B x 4 Part# E x 8 Part# D x 8 Part# F x 8 NOTE: DO NOT tighten the bolts completely at this step.
Step2: Part# C x1 Part# D x 8 Part# E x 8 NOTE: Once all bolts are in place tighten completely.
Now your table is ready for your enjoyment! WARNING: 1. Do not crawl, stand, or sit on tile table tops. 2. Do not set or lay heavy items on tile table tops. 3. Avoid extreme hot & cold items being placed on tile table tops.
Lounge Chair Owner’s Manual If you have any problems with this product, DO NOT RETURN IT TO THE STORE.
Care and Maintenance Be careful to never allow water to build up in frames as this will cause corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a liquid wax for maximum protection against UV rays and/or salty damp air. If your set includes cushions, slings, and/or an umbrella they may be cleaned by hand with a solution of soap and water with a clean water rinse.
E Base 1 F M6x45mm Hex Head Bolt 8 G M8x45mm Hex Head Bolt 4 H M6 Washer 8 I M8 Spring Washer 4 J M8 Nut 4 K Bolt Cap (M6) 8 L Bolt Cap (M8) 4 M Hex Wrench 2 N Seat Cushion 1 O Back Cushion 1 P Lumbar Pillow 1 Page 3 of 6
Assembly Steps: Step1: Part# A x 1 Part# B x 1 Part# F x 4 Part# H x 4 Part# C x 1 Part# K x 4 NOTE: DO NOT tighten the bolts completely at this step.
NOTE: DO NOT tighten the bolts completely at this step. Step3: Part# E x 1 Part# I x 4 Part# G x 4 Part# J x 4 NOTE: Once all bolts are in place tighten completely.
Step4: Part# O x 1 Part# P x 1 O P N Now the fixed arm rocker is ready for your enjoyment.
Loveseat Owner’s Manual If you have any problems with this product, DO NOT RETURN IT TO THE STORE Page 1 of 5
Care and Maintenance Be careful to never allow water to build up in frames as this will cause corrosion and freeze damage in cold climates. Wash all frames with a solution of mild soap and water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be treated with a liquid wax for maximum protection against UV rays and/or salty damp air. If your set includes cushions, slings, and/or an umbrella they may be cleaned by hand with a solution of soap and water with a clean water rinse.
F M6x15mm Hex Head Bolt 1 G M6 Washer 9 H Bolt Cap 9 I Hex Wrench 1 J Seat Cushion 2 K Back Cushion 2 L Toss Pillow 2 Assembly Steps: Step1: Part# A x1 Part# B x1 Part# C x1 Part# E x 4 Part# G x 4 Part# H x 4 Note: DO NOT tighten the bolts completely at this step.
Step2: Part# D x 1 Part# E x 4 Part# F x 1 Part# G x 5 Part# H x 5 Note: Tighten completely until all bolts are in place.
Now the loveseat is ready for your enjoyment.
