Owner Manual

90°

Step 7: Connect Monkey Bar Assemblies

90°

A: Using a MK Bracket connect both (1943) MK Rail Long and (1565) MK Rail Short to each (1367) Post MK with

1 (G10) 5/16 x 3” Hex Bolt (with lock washer, at washer and t-nut) and MK Bracket to the rails using 2 (S6) #12 x

1” Pan Screws per rail as shown in g. 7.1 and 7.2.

B: Attach MK Bracket to both (1367) Post MKs with 2 (S6) #12 x 1” Pan Screws per bracket. (g. 7.2)

Note: Pre-drill all holes using a 1/8” drill bit before installing the pan screws.

This end

connects

to Post

This end connects

to MK Mount

1-1/4”

MK Bracket

Hardware

2 x 5/16 x 3” Hex Bolt

(5/16”lockwasher,5/16”atwasher,5/16”t-nut)

8 x #12 x 1” Pan Screws

2 x MK Rail Long 2 x 4 x 52”

1 x MK Rail Short 2 x 4 x 50”

1565

1367

1943

G10

Fig. 7.1

Fig. 7.2

5/16” Flat

Washer

5/16” Lock

Washer

5/16”

T-Nut

G10

x 4

Other Parts

2 x MK Bracket

1367