Owner Manual

Flush to edge

Overlap cedar roong

Step 8: Roof Assembly

Part 2

D: Starting at the top of the Roof Support Assembly and working down attach 3 (1930) Siding on one side of the

(1424) Roof Supports and (1425) Roof Joists with 3 (S0) #8 x 7/8” Truss Screws per board. (g. 8.2) Be sure to

overlap the Siding as shown in g. 8.3.

E: Repeat Step D for the other side of the Roof Support Assembly overlapping top boards so there are no gaps.

(g. 8.3)

F: Drill a hole 1-1/2” up from the bottom of the 2 bottom (1930) Siding (for bottom row only). Attach 1 (1930)

Siding at the bottom of the Roof Support Assembly on each side, making sure they are ush to each (1424) Roof

Support with 3 (S0) #8 x 7/8” Truss Screws. (g.8.2 and 8.4)

G: Evenly space and attach the remaining (1930) Siding, leaving no gaps, with 3 (S0) #8 x 7/8” Truss Screws per

board. There should be 12 (1930) Siding per side. (g. 8.2)

Fig. 8.2

1930

Fig. 8.3

Fig. 8.4

1930

x 36 per side

1-1/2”

for bottom row

only (each side)

Roof Supports

removed for

clarity

Wood Parts

Hardware

72 x #8 x 7/8” Truss Screw24 x Siding 3/8 x 3-1/2 x 41-1/2”

1930

Flush to edge

1424