Owner Manual

30
A: Attach (1779) CE Access Board ush to the top and outside edges of each (0349) Rock Rail with 4 (S2) #8 x
1-1/2” Wood Screws. (g. 13.1)
B: Below (1779) CE Access Board stagger 3 (1777) CE Rock Board B and 2 (1778) CE Rock Board A as shown in
g. 13.1, making sure they are evenly spaced with a minimum 2-1/8” and maximum 2-3/8” gap. The sides are ush
to the outside edges of each (0349) Rock Rail. Attach using 4 (S2) #8 x 1-1/2” Wood Screws per board. (g. 13.1)
PlacingtheRockBoardsasshowning.13.1willpreventrocksfromformingastraightline.
Note: Gaps
between boards
2-1/8”, not to
exceed 2-3/8”
Note: The holes in the
rock boards must orient
to the top of the boards.
Step 13: Rock Wall Assembly
Wood Parts
Hardware
Fig. 13.1
1779
S2
0349
0349
1777
1778
1777
1778
1777
x 24
24 x #8 x 1-1/2” Wood Screw
1 x CE Access Board 1 x 6 x 17”
3 x CE Rock Board B 1 x 6 x 17”
2 x CE Rock Board A 1 x 6 x 17”
1779
S2
1778
1777