Owner Manual

31
Other Parts
Hardware
Step 14: Attach Rocks to Rock Board
A: Place 1 rock on each (1777) and (1778) CE Rock Board A & B (g. 14.1) and attach using 1 (PB2) 1/4 x
1-1/4” Pan Bolt (with lock washer, at washer and barrel nut) and 1 (S10) #8 x 1” Pan Screw per rock. The
rocks can be attached in any order. (g. 14.1 and 14.2)
ThescrewmustbeintheholedirectlyunderthePanBolt,itwillstoptherockfromspinning.(g.14.2)
Note: Make sure all hardware is used to secure each rock properly.
Fig. 14.1
S10
1777
Fig. 14.2
1778
1777
1778
1777
PB2
1/4” Barrel Nut
3/16” Flat
Washer
1/4” Lock
Washer
Rocks
5xRocks(Green/Yellow)
5 x #8 x 1” Pan Screw
5 x 1/4 x 1-1/4” Pan Bolt
(3/16”atwasher,1/4”lockwasher,1/4”barrelnut)
S10
PB2