Owner Manual

Step 15: Attach Gusset to Fort

A: Make sure the assembly is square before proceeding.

B: From the inside of the assembly, attach (0312) Gusset to (1931) Post on the Swing Wall, the tip should be

ush to the outside edge of the post, with 2 (S4) #8 x 3” Wood Screw as shown in g. 15.1. The other end of the

gusset should be tight against (1908) Front Floor.

C: Attach the other end of (0312) Gusset to (1908) Front Floor with 1 (S3) #8 x 2-1/2” Wood Screw and 1 (S4)

#8 x 3” Wood Screw as shown in g. 15.1.

Wood Parts

Hardware

Fig. 15.1

Swing Wall Side

1908

1931

0312

Inside Fort View

Tip ush to edge

1 x #8 x 2-1/2” Wood Screw

3 x #8 x 3” Wood Screw

1 x Gusset 2 x 3 x 16”

0312