Owner Manual

33
1936
Fig. 16.3
1/4” at
washer
1/4” t-nut
1/4” lock
washer
1894
1931
Notice hole
positioned down
H13
1/4” at
washer
1/4” t-nut
1/4” lock
washer
Step 16: Back Wall Assembly
Part 1
A: Attach (1894) Back Floor to (1761) Side Joist using 2 (H3) 1/4 x 2-1/2” Hex Bolts (with lock washer, at
washer and t-nut) and 2 (S7) #12 x 2” Pan Screws as shown in g. 16.2.
B: On the back side of the assembly, attach (1894) Back Floor to both (1931) Posts, with (1761) Side Joist on
the inside of the assembly, using 2 (H5) 1/4 x 4-1/2” Hex Bolts (with lock washer, at washer and t-nut). (g. 16.3)
Note that the bolt hole is towards the bottom of the board.
C: Attach (1936) MK Mount to (1894) Back Floor with 1 (H13) 1/4 x 3-1/2” Hex Bolt (with lock washer, at washer
and t-nut). (g. 16.3).
Notice hole
positioned
down
Wood Parts
Hardware
1761
Fig. 16.2
S7
1/4” at
washer
Fig. 16.1
1/4” t-nut
1/4” lock
washer
Back
1894
H3
1x 1/4x3-1/2”HexBolt(1/4”lockwasher,1/4”atwasher,1/4”t-nut)
2x 1/4x4-1/2”HexBolt(1/4”lockwasher,1/4”atwasher,1/4”t-nut)
2x 1/4x2-1/2”HexBolt(1/4”lockwasher,1/4”atwasher,1/4”t-nut)
2 x #12 x 2 Pan Screw
1 x MK Mount 2 x 3 x 36”
1 x Side Joist 2 x 2 x 34-3/4”
1 x Back Floor 5/4 x 4 x 38-1/2”
1936
H5
H13
1894
1761
H3
S7
H3
H5
H5
1931
1761