Owner Manual

Fig. 17.1

Step 17: Attach Ground Stakes

A: Drive 2 (0318) Ground Stakes 10-1/2” into the ground at the two areas indicated on (1933) Ground SW as

shown in g. 17.1. Attach using 2 (S3) #8 x 2-1/2” Wood Screws per ground stake. The screws must catch

both the (1931) Post and the (0369) Lower Diagonal. (g. 17.2 and 17.3)

MOVE FORT TO FINAL LOCATION. FINAL LOCATION MUST BE LEVEL GROUND

Warning! To prevent tipping and avoid potential injury, stakes must be

driven 10-1/2” into ground. Digging or driving stakes can be dangerous if

youdonotcheckrstforundergroundwiring,cablesorgaslines.

Hardware

Wood Parts

10-1/2”

In Ground

Fig. 17.2

Fig. 17.3

0318

1931

0369

1933

0318

4 x #8 x 2-1/2” Wood Screw

2 x Ground Stake 1-1/4 x 1-1/2 x 14”

0318

Inside Fort View