Owner Manual

36
Fig. 18.3
Inside Fort View
Swing Wall Side
1895
1903
2-3/4”
Step 18: Floor Frame Assembly
A: Remove the bottom bolt in (1938) Wall Mount. Do not discard this bolt you will re-install it after the (1903)
Floor Joist is attached. (g. 18.2)
B: From inside of the assembly, measure 2-3/4” down from the top of (1895) Floor End (g. 18.3) and 2-3/8”
down from (1934) End Floor (g. 18.4) then attach (1903) Floor Joist to each board with 2 (S4) #8 x 3” Wood
Screws per end. (g. 18.2 and 18.4)
C: Reinstall the bottom bolt in (1938) Wall Mount and tighten both bolts. (g. 18.1)
Wood Parts
Hardware
Fig. 18.1
Fig. 18.2
1903
S4
1895
1938
Swing Wall Side
Remove this bolt then re-tighten
after adding screws
4 x #8 x 3” Wood Screw
1 x Floor Joist 5/4 x 3 x 38-1/2”
1903
S4
Fig. 18.4
1934
Inside Fort View
S4
1903
Window Wall Side
2-3/8”