Owner Manual

41
Step 23: Window Wall Assembly
Part 1
Wood Parts
Hardware
A: Place 1 (1859) Wall Trim tight to the top of (1934) End Floor and ush to the outside edge of (1931) Post on
the Front side of the assembly. Attach to (1931) Post with 2 (S2) #8 x 1-1/2” Wood Screws. (g. 23.1)
B: Tight to top of (1934) End Floor and tight to (1859) Wall Trim attach (1929) Siding to both (1931) Posts with 2
(S0) #8 x 7/8” Truss Screws as shown in g. 23.1.
C: Tight to (1929) Siding and top of (1934) End Floor attach a second (1859) Wall Trim to (1931) Post with 2 (S2)
#8 x 1-1/2” Wood Screws. (g 23.1)
D: Tight to the top of both (1859) Wall Trims and ush to the edges of both (1931) Posts, attach (1939) Lower
Window with 4 (S2) #8 x 1-1/2” Wood Screws. (g. 23.1)
E: Tight to the bottom of (1935) Side Roof and ush to the edges of both (1931) Posts, attach (1940) Top Window
with 4 (S2) #8 x 1-1/2” Wood Screws. (g. 23.1)
Fig. 23.1
1935
1940
1859
S0
1929
1859
1931
S2
1939
S2
S2
1931
12 x #8 x 1-1/2” Wood Screw
2 x #8 x 7/8” Truss Screw
2 x Wall Trim 1 x 2 x 10”
1 x Top Window 1 x 6 x 35-7/8”
1 x Lower Window 1 x 4 x 35-7/8”
1 x Siding 3/8 x 3-1/2 x 33”
1859
S2
1940
1939
1929
S2
Back
Front
Flush
S0
1934
S2