Owner Manual

47
Hardware
Step 25: Attach Roof to Fort
A: With two helpers place the Roof Assembly, from Step 8, on the fort as shown in g. 25.1. The roof should
be centred on the assembly and (1424) Roof Supports should be ush to the ends and tight to the outside
face of each (1935) Side Roof. The (1425) Roof Joist on the back of the fort should t tight against the
angled edge of (1936) MK Mount.
B: Attach both sides of each (1935) Side Roof to each (1424) Roof Support using 4 (S2) #8 x 1-1/2” Wood
Screws per (1935) Side Roof. (g. 25.1)
Fig. 25.1
1424
Flush
S2
1935
Flush
1424
1935
1424
S2
1936
1424
Note: Boards removed for clarity
8 x #8 x 1-1/2” Wood Screw
S2
S2
x 2 hidden
behind boards
1425