Owner Manual

54
Step 30: Sand and Water Table Wall Assembly
Part 2
F: On the outside of the assembly place 1 (1941) Water Sand Support overlapping Hampton Tarp by 1” and ush
to the outside edges of both (1931) Posts. Make sure the board is level then attach with 4 (S3) #8 x 2-1/2” Wood
Screws. (g. 30.4 and 30.5)
G: From inside the assembly and 1/2” in from the edge of the canopy attach Hampton Tarp to (1941) Water Sand
Support with 4 evenly spaced (S5) #8 x 1/2” Pan Screws (with #8 at washer). (g. 30.5)
H: Flush to the top of the rst (1941) Water Sand Support attach a second (1941) Water Sand Support to both
(1931) Posts, on the inside of the assembly, with 4 (S3) #8 x 2-1/2” Wood Screws. Make sure the board is level.
(g. 30.6)
Wood Parts
Hardware
Fig. 30.4
Outside Fort View
S3
1931
1941
S3
Fig. 30.5
S5
1941
Flush
Space evenly
8 x #8 x 2-1/2” Wood Screw
4x #8x1/2”PanScrew(#8atwasher)
S5
S3
2 x Water Sand Support 2 x 2 x 35-7/8”
1941
Fig. 30.6
S3
Flush
1941
1931