Owner Manual

56
Step 31: Attach Swing Assembly to Fort
A: Attach Swing Assembly from Step 4 to (1938) Wall Mount with 1 (G5) 5/16 x 4-1/2” Hex Bolt (with lock
washer, at washer and t-nut) and 1 (G8) 5/16 x 2” Hex Bolt (with 2 at washers and 1 lock nut) as shown in
g. 31.1 and 31.2.
Hardware
Fig. 31.2
1938
5/16” Flat
Washer
5/16” Lock
Washer
5/16”
T-Nut
G5
1x 5/16x2HexBolt(5/16”atwasherx2,5/16”locknut)
1x 5/16x4-1/2”HexBolt(5/16”lockwasher,5/16”atwasher,5/16”t-nut)
G8
G8
5/16”
locknut
5/16” Flat
Washer
G5
pg 56 image
Fig. 31.1