Assembly Instructions

Components and Hardware List
Made in Viet Nam
Page 1 of 1
Mirror Frame
A
1 pc.
B
C
D
E
F
Support Bar
5/16-18 x 1-1/2"
Long Allen-Head
Bolt
5/16" Flat Washer
5/16" Spring
Washer
2 pcs. 8 pcs.
8 pcs. 8 pcs. 1 pc.
Be sure to check all packing
material carefully for small parts,
which may have come loose
inside the carton during shipment.
To prevent possible scratches and damage, this furniture must be assembled by two people on a soft
surface such as a blanket or carpet.
Step 1. Using two people, carefully move the Dresser to be a few inches from the wall, near
where it wall be used.
2. Attach the Support Bars (B) to the back of dresser with the Allen Head Bolts (C), Spring
Washers (D) and Flat Washers (E) but do not fully tighten Bolts.
3. Place the Mirror onto the top back edge of the Dresser, against the Support Bars. Attach to
the Support Bars using the same Bolts and Washers as in previous Step.
4. Tighten all Bolts using the Allen Wrench (F).
5. Carefully move the Dresser back to near the wall.
5mm Allen
Wrench
Bedroom
Assembly Instructions
Landscape Mirror