Assembly Instructions

Components and Hardware List

Step 2. Install the Leveler (H) into the

bottom end of the Center Support

Leg. Attach the Support Leg to the

bottom of the Dresser as shown. The

Leveler can be adjusted if necessary

to provide support for the middle of

the dresser.

Dresser

Bedroom

Page 1 of 2

7-Drawer Dresser

Made in Viet Nam

Assembly Instructions

PAGE 1
Page 1 of 2 Bedroom Made in Viet Nam Assembly Instructions Components and Hardware List 7-Drawer Dresser Dresser Dresser Step 2. Install the Leveler (H) into the bottom end of the Center Support Leg. Attach the Support Leg to the bottom of the Dresser as shown. The Leveler can be adjusted if necessary to provide support for the middle of the dresser .
PAGE 2
Anti-Tip Hardware Installation Instructions Page 2 of 2 Notice: This manufacturer recommends that steps be taken for certain furniture items toprevent or minimize the risk of tip-over. This furniture is equipped with Tip-over RestraintHardware for use to minimize this risk, if used. Please follow below installation steps. They recommend that parents and guardians periodically visit the U.S. ConsumerProduct Safety Commission (CPSC) website at http://www.cpsc.