Assembly Instruction

page 1 of 2

2 PCSA 1L&R FRONT LEG BOLT-SMALL 4 PCS

SPRING WASHER 8 PCS

WASHER

ALLEN KEY 1 PC

1 PC

CHAIR BACK WITH

SEAT

L&R REAR LEG

BOLT-LARGE

STEP 1

Align and attach both front legs to the chair seat, insert bolts

and washers to the pre-drilled holes, do not tighten it first.

2 PCS 2

4 PCS

8 PCS

5/16"X2"

5/16"X2-1/2"

5/16"

5/16"X19mm

5mm

HARDWARE LIST

PART LIST

Assembly Instruction

DINING CHAIR

PAGE 1
Assembly Instruction DINING CHAIR HARDWARE LIST PART LIST A L&R FRONT LEG 2 PCS 1 BOLT-SMALL B L&R REAR LEG 2 PCS 2 BOLT-LARGE C CHAIR BACK WITH SEAT 1 PC 3 4 5 SPRING 5/16"X2" 5/16"X2-1/2" 4 PCS WASHER WASHER ALLEN 4 PCS KEY 5/16" 8 PCS 5/16"X19mm 8 PCS 5mm 1 PC STEP 1 Align and attach both front legs to the chair seat, insert bolts and washers to the pre-drilled holes, do not tighten it first.
PAGE 2
STEP 2 Align and attach both rear legs with outward direction to the chair seat, insert bolts and washers to the pre-drilled holes, do not tighten it first. STEP 3 Assembly completed Helpful Tip: -Instead of applying downward pressure while reaching under to tighten bolts, have someone sit in the chair while you tighten the bolts. Stand chair up on an even surface and check that it is balanced. If there is a slight wobble, apply downward pressure in the corner where a leg is uneven.