Assembly Instruction

STEP 2
Align and attach both rear legs with outward direction to the chair seat,
insert bolts and washers to the pre-drilled holes, do not tighten it first.
page 2 of 2
STEP 3
Assembly completed
Stand chair up on an even surface and check that it is balanced.
If there is a slight wobble, apply downward pressure in the corner where a leg is
uneven. Keeping pressure in that corner, tighten all bolts.
If balanced, apply downward pressure evenly in the center and tighten all bolts.
Do not over-tighten beyond hole depth.
Helpful Tip:
-Instead of applying
downward
pressure while reaching
under to tighten bolts,
have someone sit in the
chair while you tighten the
bolts.