ASSEMBLY INSTRUCTION LOVE SEAT E Yam Frame [-JAm Frame-right 1pc Strands [J seat cushion LJ CBC Bolt 1pc PCs IN CBC Lott FT Fiat w [3 Spring Washer I Screw ICBM Bol $V » PCs 10 pes 10 pcs } 1pc This page lists all the contents Incl ] co Erna ake to tie fo ont © hardware as well as the individual opponents to this p 5 unpack and prepare for assembly, place Ce Pound Or peddled ebm —
Start assembly Legs (F) into Arm Frame-left (A) and Arm Frame-right legs clockwise until sure the screw holes In legs facing toward inside of Screw (L) into designated holes and tum clockwise with screw driver(NOT INCLUDED)until tight. H Attach Back Cushion (C) with Arm Frame-left (A) and Arm Frame-right (B) using CBC Bolts (H) and Spring Washer (K) and Flat Washer (J) .Tum clockwise with Allen Key (M) until 80% tight. NOTE:LEAVE BOLTS LOOSE FOR EASY ASSEMBLY WITH FRONT STRETCHER.
H Insert CBC Lott (1) though Spring Washer (K) and Flat Washer (J) fo attach the rightfulness side am, tum clockwise with Allen Key (M) until 80% tight.Carefully position front Stretcher (D) over bolts as shown. Then tighten all bolts. Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.
Furniture Care & Cleaning Instructions ‘Wood Furniture Care & Cleaning Instructions TT ee on sunlight or excessive temperatures; extreme changes humidity can cause waging, Always ue cosines, pads, cloth o it protect the protective mats under hot dishes. Use a protective pad when writing with a pen. Lift objects rather than dragging them over the furniture surface. Blot spills immediately with a clean cloth. Dust often using a soft, clean, lint-free cloth.
