Owner Manual

5
Chair
Assembly Instructions
1.Ensure all parts have been removed from the carton and place on a protected
surface or carpet.
2.Check all parts and hardware are the same as the “Parts List”.
3.Connect Seat Frame (2) to Back (1) using with Bolt (A) Spring Washer (C) and
Flat Washer (B). Then tighten with Allen Key (D).
4.Please do not fully tighten Bolts (A) until the chair is fully assembled.
1.Attach Front Legs (3) to Seat Frame (2) with Bolts (A) Spring Washer (C) and
Flat Washer (B) then tighten with Allen Key (D).
2.Please do not fully tighten Bolt (A) until the chair is fully assembled.
1
2
A
C
B
1
2
Approx 80% tight
Approx 80% tight
3
3
2