Installation & Assembly

Step 3. CUSHION SEAT ASSEMBLY
3A. Place seat cushion (1) upside down on a clean cloth.
38. Slowly insert legs into the bottom frame of seat cushion.
3C. Insert Bolt (C) with Spring Washer (B) and Flat Washer (A) through
seat frame into legs.
3D. Turn bolts clockwise with Allen Wrench (E) until tight.
3E. Insert Wood Screws (D) into both ends of Long Front/Rear Stretchers
and tighten with Phillips Head screwdriver (not supplied).
0
4A
B
C



Repeat steps 1-3 to assemble remaining stool.
Page 5