Installation & Assembly

13/18
ASSEMBLY
STEP 11
1. Attach Hings on Doors H to Sides B using Phillips Screws 7 into pre-drilled guide holes.
2. Attach Magnet Plates 10 to bottom corner of Doors H using Phillips Screws 8 .
into guide holes on Doors H .
3. Attach Magnet 10 to Bottom Shelf F using Phillips Screws 8 into guide holes on
Bottom Shelf F .
4. Use Phillips screwdriver attach Handles 11 to Doors H .
NOTE: The screwdriver is not
included in the hardware pack.