ASSEMBLY INSTRUCTION TWO TONE FINISH SIDE CHAIR
Take the Allen Wrench, and turn the bolts until the legs are secure. DO NOT TIGHTEN COMPLETELY. Stop when you feel you are adding force to tighten the bolt.
Stand chair up on an even surface and check that it is balanced. If there is a slight wobble, apply downward pressure in the corner where a leg is uneven. Keeping pressure in that corner, tighten all bolts. If balanced, apply downward pressure evenly in the center and tighten all bolts. Do not over-tighten beyond hole depth. Helpful Tip:-Instead of applying downward pressure while reaching under to tighten bolts,have someone sit in the chair while you tighten the bolts.
