Owner Manual

5
Chair
Assembly Instructions
1.Attach Front Legs (3) to Seat Frame (2) with Bolts (A) Spring Washer (C) and
Flat Washer (B) then tighten with Allen Key (D).
2.Please do not fully tighten Bolt (A) until the chair is fully assembled.
1
2
Approx 80% tight
Approx 80% tight
1.Ensure all parts have been removed from the carton and place on a protected
surface or carpet.
2.Check all parts and hardware are the same as the “Parts List”.
3.Connect Seat Frame (2) to Back (1) with Bolt (A) Spring Washer (C) and Flat
Washer (B) then tighten with Allen Key (D).
4.Please do not fully tighten Bolt (A) until the chair is fully assembled.
A
C
B
1
2
3
3
2