Assembly Instructions

Page 1 of 2

MADE IN MALAYSIA

PARTS LIST

PART NO

FIGURE

DESCRIPTION

Q'TY

Wood Seat

Chair Back

1 Pce

Seat Frame

1 Pce

Hardware Bag

Front Leg (Right)

1 Pce

Front Leg (Left)

1 Pce

Front Stretcher (Short)

2 Pcs

Side Stretcher (L/R-Long)

BACK SIDE CHAIR

PAGE 1
BACK SIDE CHAIR PARTS LIST PART NO DESCRIPTION FIGURE Q'TY 01 Hardware Bag 1 Pce 02 Chair Back 1 Pce 03 Wood Seat 1 Pce 04 Seat Frame 1 Pce 05 Front Leg (Right) 1 Pce Front Leg (Left) 1 Pce Front Stretcher (Short) 1 Pce Side Stretcher (L/R-Long) 2 Pcs 06 10 07 02 03 04 07 10 05 06 Page 1 of 2 MADE IN MALAYSIA
PAGE 2
BACK SIDE CHAIR Hardware List : 8x1.1/4" Pan Head Screw 6 pcs M6x40mm JCBC Bolt 2 pcs M6x70mm JCBC Bolt 8 pcs M6x13mm Lock Washer 10 pcs M6.5x16.5mm Flat Washer 10 pcs Allen Key 1 pce Glue 1 pce ASSEMBLY: 1. Position the Chair Back on a soft surface such as a carpet. Place the Box System Assembly(Wood seat is pre- attached to the seat frame in assembly) on to the middle rail of the Chair Back with the dowel fully Inserted into the pre-drilled hole. 1.1.