LOW STORAGE CABINET 1/13
DO NOT RETURN FOR REPLACEMENT PARTS OR OTHER INQUIRIES PLEASE CONTACT US PLEASE ENSURE TO HAVE THE MODEL # FROM THE PACKAGING OR INSTRUCTION BOOKLET 2/13
IMPORTANT : Please read this manual carefully before beginning assembly of this product. Keep this manual for future reference. SAFETY INFORMATION Identify all the parts and hardware. Do not discard of the packaging until you have checked that you have all of the parts and hardware required. Hardware package may have spare parts. WARNING: This item contains small parts which can be swallowed by children and pets. Keep children and pets away during assembly.
PRE-ASSEMBLY INFORMATION PARTS DESCRIPTION A B Ba ck Sid e Fro nt Sid e Fro nt S i de TOP QTY 1 SIDE QTY 1 PAIR C D Ba ck Sid e Fro nt Sid e Fro nt S i de DIVIDER QTY 1 E BOTTOM SHELF QTY 1 F CABINET SHELF QTY 2 G DOOR QTY 1 PAIR BACK QTY 1 PAIR NEED HELP? For help with assembly or if you are missing a part, Please call customer service 4/13
PRE-ASSEMBLY INFORMATION HARDWARE DESCRIPTION 2 1 3 ALLEN KEY SCREW M6 X 30 mm QTY 12 4 5 6 PHILLIPS SCREW ROUND HEAD M4 X 15 mm QTY 18 ALLEN KEY QTY 1 7 SHELF SUPPORT QTY 12 9 8 PHILLIPS SCREW M3 X 12 mm QTY 12 10 WOOD DOWEL 8 X 30 mm QTY 10 CAM LOCK PIN CAM LOCK QTY 6 PHILLIPS SCREW M3 X 15 mm QTY 8 MAGNET and PLATE QTY 2 SETS 11 a. M4 x 25mm b. M4 x 15mm c.
COMPONENTS – KEY DIAGRAM 6/13
ASSEMBLY STEP 1 1. Insert 2 Dowels 3 into pre-drilled holes on Divider C . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of Dowels should be exposed. 3. Attach Divider C to Bottom Shelf D using 3 Allen Key Screws 1 through predrilled holes. 4. Use Allen Key 4 to tighten screws. Do not over-tighten.
ASSEMBLY STEP 2 1. Insert 4 Dowels 3 into pre-drilled holes on Bottom Shelf D ( 2 dowels / each side ). 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of Dowels should be exposed. 3. Attach 3 Cam Lock Pins 2 to each Side B into guide holes. 4. Align and insert Cam Lock Pins on Sides B into pre-drilled holes on Bottom Shelf D . 5. Place 6 Cam Locks 2 into pre-drilled holes on Bottom Shelf D . 6. Use a flathead screwdriver to tighten Cam Locks into Pins.
ASSEMBLY STEP 3 1. Insert 2 Dowels 3 into top corners of each Side B . 2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of Dowels should be exposed. 3. Align pre-drilled holes bottom corners of Top A with Dowels 3 in Sides B . 4. Attach Top A to Sides B and Divider D using 9 Allen Key Screws 1 . 5. Use Allen Key 4 to tighten screws. Do not over-tighten. STEP 4 NOTE: The screwdriver is not included in the hardware pack. 1.
ASSEMBLY STEP 5 NOTE: The screwdriver is not included in the hardware pack. 1. Attach Hings on Doors F to Sides B using Phillips Screws 7 into pre-drilled guide holes. 2. Attach Magnet Plates 9 to bottom corner of Doors F using Phillips Screws 8 . into guide holes on Doors F . 3. Attach Magnet 9 to Bottom Shelf D using Phillips Screws 8 into guide holes on Bottom Shelf D . 4. Use Phillips screwdriver attach Handles 10 to Doors F .
ASSEMBLY STEP 6 1. Use 4 Shelf Supports 6 for each Shelf Cabinet E in desired location. 2. 2 Shelf Supports 6 may be used on back top of each Shelf Cabinets E as a tipping restraint.
ASSEMBLY When you determine the location for your unit, install the Furniture Tipping Restraint. Carefully follow the instructions on the package. STEP 7 STEP 8 NOTE: The screwdriver is not included in the hardware pack. STEPS 7&8 1. To attach Tipping Restraint 11 , fllow instructions on Tipping Restraint package.
WARRANTY Thank you for purchasing our product. These products have been made to demanding, high-quality standards and are guaranteed for domestic use against manufacturing faults for a period of 12 months from the date of purchase. This warranty does not affect your statutory rights. In case of any malfunction of your product (failure, missing parts, etc.) please contact us at our toll free service line We reserve the right to repair or replace the defective product, at its discretion.
