Owner Manual

ASSEMBLY
STEP 5
1. Attach Hings on Doors F to Sides B using Phillips Screws 7 into pre-drilled guide holes.
2. Attach Magnet Plates 9 to bottom corner of Doors F using Phillips Screws 8 .
into guide holes on Doors F .
3. Attach Magnet 9 to Bottom Shelf D using Phillips Screws 8 into guide holes on
Bottom Shelf D .
4. Use Phillips screwdriver attach Handles 10 to Doors F .
NOTE: The screwdriver is not
included in the hardware pack.
10/13