Assembly Instructions

PART NO

FIGURE

DESCRIPTION

Q'TY

Table Top

Leg

PARTS LIST

4 Pcs

1 Pc

Hardware Bag

SOLID TOP BUTTERFLY LEAF PEDESTAL TABLE

08 Pedestal

1 Pc

02 Apron Hinge

4 Pcs

09 Leaf Hinge

2 Pcs

05 Glides

2 Pcs

17 Support Leaf

1 Pc

18 Mounting Plate

1 Pc

19 Side Mounting Plate

2 Pcs

10 Hook Lock

4 Pcs

12 Support Leaf Hinge

2 Pcs

20 Apron Leaf

2 Pcs

PAGE 1 OF 3 MADE IN MALAYSIA

PAGE 1
SOLID TOP BUTTERFLY LEAF PEDESTAL TABLE PARTS LIST PART NO FIGURE DESCRIPTION Q'TY 01 Hardware Bag 1 Pc 13 Table Top 1 Pc 07 Leg 4 Pcs 08 Pedestal 1 Pc 02 Apron Hinge 4 Pcs 09 Leaf Hinge 2 Pcs 05 Glides 2 Pcs 17 Support Leaf 1 Pc 18 Mounting Plate 1 Pc 19 Side Mounting Plate 2 Pcs 10 Hook Lock 4 Pcs 12 Support Leaf Hinge 2 Pcs 20 Apron Leaf 2 Pcs 13 20 08 07 PAGE 1 OF 3 MADE IN MALAYSIA
PAGE 2
SOLID TOP BUTTERFLY LEAF PEDESTAL TABLE HARDWARE PART : Hex Nut 12 pcs Large Lock Washer 12 pcs Large Flat Washer 12 pcs Wrench 1 pc Small Lock Washer 8 pcs JCBC Bolt 8 pcs Small Flat Washer 8 pcs Allen Key 1 pc NOTE : THE UNIT SHOULD BE ASSEMBLED BY 2 OR MORE PEOPLE. Wrench Hex Nut Lock Washer(Large) Flat Washer(Large) ASSEMBLY STEP 1 Turn the pedestal upside down. Attach legs by inserting hanger bolts through pre-drilled holes on pedestal.
PAGE 3
SOLID TOP BUTTERFLY LEAF PEDESTAL TABLE STEP 4 Lift both leaves from the compartment and flip up the aprons then unfold table leaf and place the leaf on the top surface carefully. Flip up apron STEP 5 Push table top from both ends to close gap and lock the hooks underneath the table. Adjust the level glides until the table sits firmly. Lock Hook Level Glide TO STORE THE CENTRE LEAF WHEN NOT IN USE Unlock the hooks underneath the table and pull the table top wide open equally from both ends.