Installation & Assembly

A
Table top
Table leg
Parts list Parts picture Description
Q'ty
Parts list Parts picture Description
Q'ty
4
1
C
ASSEMBLY INSTRUCTIONS
22
33
11
D
1.Turn the table top(A) upside down on the soft clean surface. Loosely attach the legs(C) to the table
top using bolts(D), big flat washers(E), big lock washers(F),nuts(G)and nut caps(H). tighten the
bolts at this time. Do not over-tighten.
2.Loosely attach the center plates(B) to the legs with small flat washers(J), small lock washers(K), bolts(I)
and PVC covers(L).
3.Tighten all the bolts and nuts completely. DO NOT over tighten.
4.Turn the table onto its legs. Use the adjuster feet to level the table.
Center plate
1
B
4
E
4
F
4
Bolt
Big lock washer
Big flat washer
I
4
Screw
Wrench
PVC cover
(M8)
(M8)
J
4
Small flat washer
(M6)
L
4
1
K
4
Small lock washer
(M6)
Nut
4
G
Nut cap
4
H
M
(M6*35)
(M8)
A
H
E
D
F
G
J
L
I
K
B
C
ATTENTION:
Assembly steps:
(M8*30)
1. Please read these instructions carefully before assembly.
2. Aluminum is soft metal over tighten may strip threads or break the part.
3. DO NOT use power tools.
4. Check parts against the parts list to make sure you have all parts needed for proper assembly.
5.Familiarize yourself with the inventory of parts and the accompanying illustrations to ensure safe
and proper assembly.
Warning : DO NOT use acid or alkaline washing liquid to clean the product.
O
Foot Leveler
N
Wrench
1
DO NOT OVER TIGHTEN
*
NO SOCKET DRIVERS
*
NO POWER TOOLS
*
4
(M8)
(M6)
These parts have been assemble by factory already!
O