Installation & Assembly

Step 1

Coat Hooks with Tray Assembly Instructions

Lay out all parts on a "non-abrasive" surface to avoid scratching furniture.

PARTS

B French Cleat

A Tray

D End

C End

E Back

End-2

Tray

Qty.

DescriptionDrawing

NO.

Back

French Cleat

End-1

Hex Wrench

Wood Screw

NO.

Drawing Description

Qty.

Hex Bolt-30mm

Coat Hooks with Tray

Thank you for purchasing our Coat Hooks with Tray. Assembly of this product requires a

screwdriver. We have found it helpful to have a second person present in at least one step

of the assembly.

1 of 2 Hooks with Storage

PAGE 1
Coat Hooks with Tray Thank you for purchasing our Coat Hooks with Tray. Assembly of this product requires a screwdriver. We have found it helpful to have a second person present in at least one step of the assembly. Coat Hooks with Tray Assembly Instructions Lay out all parts on a "non-abrasive" surface to avoid scratching furniture. A Tray B French Cleat C End E Back D End NO. Drawing Description Qty. NO.
PAGE 2
Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when first assembling this product. Step 2 Remove all parts and hardware from packing material. Wooden pieces should be placed on a non abrasive surface (like the carton or carpet) to prevent damage to the finish. Note the French Cleat (B) is pre-installed on the back of the Back (E) with 2 of the Wood Screws (G).