Assembly Instructions

Components and Hardware List
Made in Viet Nam
Page 1 of 2
Leg
A
To prevent possible scratches and damage, this furniture
must be assembled by two people on a soft surface such
as a blanket or carpet.
Step 1: Place the Sideboard on its back. Attach a Leg (A)
underneath each corner using the 2" Long Allen Head Bolts (G), Spring Washers (H) and Flat Washers (I).
Tighten using the Allen Wrench (J). Assemble a Leveler (C) into the bottom of the Legs.
Step 2: Assemble a Leveler (C) into the Middle Support Leg (B) and attach the Leg to the bottom of the
Console Sideboard. The Leveler can be adjusted to support the middle of the cabinet and adjust the door fit,
if needed.
Step 3. Install the Shelf Supports (F) into the selected set of holes behind each door. Install the Wood Shelves
(D) & (E) onto the Shelf Pins.
4 pcs.
B
C
I
E
F
Middle
Support Leg
Leveler
M5/16"-18 x 2"
Long Allen Head
Bolt
5mm Allen
Wrench
5/16" *19*2mm
Flat Washer
5/16" Spring
Washer
1 pc.
5 pcs.
G
8 pcs. 8 pcs.
8 pcs.
D
Shelf Support
8 pcs.
Small Adjustable
Shelf
H
J
Anti-tipping
restraint kit
1 pc.
D
F
Step 3
E
D
G
H
I
J
Step 1
C
B
Step 2
Anti-tipping Restraint Kit
inside white plastic bag (K)
A
Be sure to check all packing
material carefully for small
parts, which may have come
loose inside the carton during
shipment.
K
1 pc.
1 pc.
1 pc.
Large Adjustable
Shelf
Removable bottle
rack
L
1 pc.
Dining Room
Assembly Instructions
Console Sideboard