Assembly Instructions

Components and Hardware List
Page 1 of 2
Bun Foot
A
4 pcs.
B
C D
5/16"-18 x 2" Long
Allen-Head Bolt
5/16" x 19*2mm
Flat Washer
5/16" Spring
Washer
5mm Allen
Wrench
Be sure to check all packing material carefully for small
parts, which may have come loose inside the carton during
shipment.
Tipping Restraint Hardware Kit (F)
(Inside White Plastic Bag)
E
1 pc.
F
8 pcs. 8 pcs. 8 pcs.
Made in Viet Nam
Anti-Tipping
Restraint Kit
1 pc.
To prevent possible scratches and
damage, this furniture must be
assembled by two people on a soft
surface such as a blanket or carpet.
Step 1: Place the Chest on its
back. Attach a Bun Foot (A)
underneath each corner of the
Chest using the 2" Allen Head
Bolts (B), Spring Washers (C) and
Flat Washers (D). Tighten using
the Allen Wrench (E).
Bedroom
Assembly Instructions
5-Drawer
Chest