Installation & Assembly

Place Seat Cushion(E) into the Chair as shown above.
Your Chair is ready for use.
This Chair can only be used on a flat, level surface.
Place the Chair on a LEVEL SURFACE.
Gently and gracefully, sit into to the Chair.
This pressure will help the Chair reach full alignment at all joints.
In a sequential manner, gradually tighten all Bolts until evenly secured.
When tightening the Bolts tighten sequentially.
DO NOT tighten any Bolt fully and then move on towards the next one.
If there are still wobbles, loosen the Bolts and execute this same process.
Step 5
Step 6
7 ____